Device is running software version 6.2.6.035
Serial settings are: 9600 baud, 8 data bits, no parity and 1 stop bit (9600/8-N-1)
Booting...
Testing Memory...............................
Starting..
Ethernet Routing Switch 5510-24T
Hardware Rev : 4
CPU CLOCK :266000000
Resets: 7.
Initializing Flash..
Reading MAC Address..
MAC Address: MA-CA-DD-RE-SS-00
Initializing Switch CBs
PCI unit 0: Dev 0x5670, Rev 0x02, Chip BCM5670_A1, Driver BCM5670_A0
PCI unit 1: Dev 0x5690, Rev 0x03, Chip BCM5690_A2, Driver BCM5690_A0
PCI unit 2: Dev 0x5690, Rev 0x03, Chip BCM5690_A2, Driver BCM5690_A0
Attaching SOC unit 0... PCI device BCM5670_A1 attached as unit 0.
Attaching SOC unit 1... PCI device BCM5690_A2 attached as unit 1.
Attaching SOC unit 2... PCI device BCM5690_A2 attached as unit 2.
Diagnostic Version 6.0.0.15 Nov 14 2011, 10:09:06
Test 102 ROM Config - PASSED
Test 104 FANs - PASSED
Test 207 XGS SWITCH Registers - PASSED
Test 208 FABRIC Registers - PASSED
Test 211 PHYs Register - PASSED
Test 212 Internal Loopback - PASSED
Press Esc to Enter Diag
Run Agent 1 Ver:6.2.6.035
Decompressing the image done.
Target Name: tgt
User: target
usrNetDevNameGet: no network device
done
Code Segment 0x100000 -- 0x10a0fff protection=2
Initializing ......
Broadcom Command Monitor: Copyright (c) 1998-2008 Broadcom Corporation
Completing initialization...
### ### ### ### ### ### ###
##### ### ### ##### ### ### #####
### ### ### ### ### ### ### ### ### ###
### ### ### ### ### ### ### ### ### ###
### ### ### ### ### ### ### ### ### ###
### ### ### ### ### ### ### ### ### ###
########## ### ###### ########## ### ###### ########## ###
############ ### #### ############ ### #### ############ ###
### ### ## ### ### ### ### ###
###
###
Enter Ctrl-Y to begin.
***************************************************************
*** Ethernet Routing Switch 5510-24T ***
*** Avaya ***
*** Copyright (c) 1996-2010, All Rights Reserved ***
*** BOSS 6.0 SSH ***
*** HW:34 FW:6.0.0.15 SW:v6.2.6.035 ***
***************************************************************
Testing Memory...............................
Starting..
Ethernet Routing Switch 5510-24T
Hardware Rev : 4
CPU CLOCK :266000000
Resets: 7.
Initializing Flash..
Reading MAC Address..
MAC Address: MA-CA-DD-RE-SS-00
Initializing Switch CBs
PCI unit 0: Dev 0x5670, Rev 0x02, Chip BCM5670_A1, Driver BCM5670_A0
PCI unit 1: Dev 0x5690, Rev 0x03, Chip BCM5690_A2, Driver BCM5690_A0
PCI unit 2: Dev 0x5690, Rev 0x03, Chip BCM5690_A2, Driver BCM5690_A0
Attaching SOC unit 0... PCI device BCM5670_A1 attached as unit 0.
Attaching SOC unit 1... PCI device BCM5690_A2 attached as unit 1.
Attaching SOC unit 2... PCI device BCM5690_A2 attached as unit 2.
Diagnostic Version 6.0.0.15 Nov 14 2011, 10:09:06
Test 102 ROM Config - PASSED
Test 104 FANs - PASSED
Test 207 XGS SWITCH Registers - PASSED
Test 208 FABRIC Registers - PASSED
Test 211 PHYs Register - PASSED
Test 212 Internal Loopback - PASSED
Press Esc to Enter Diag
Run Agent 1 Ver:6.2.6.035
Decompressing the image done.
Target Name: tgt
User: target
usrNetDevNameGet: no network device
done
Code Segment 0x100000 -- 0x10a0fff protection=2
Initializing ......
Broadcom Command Monitor: Copyright (c) 1998-2008 Broadcom Corporation
Completing initialization...
### ### ### ### ### ### ###
##### ### ### ##### ### ### #####
### ### ### ### ### ### ### ### ### ###
### ### ### ### ### ### ### ### ### ###
### ### ### ### ### ### ### ### ### ###
### ### ### ### ### ### ### ### ### ###
########## ### ###### ########## ### ###### ########## ###
############ ### #### ############ ### #### ############ ###
### ### ## ### ### ### ### ###
###
###
Enter Ctrl-Y to begin.
***************************************************************
*** Ethernet Routing Switch 5510-24T ***
*** Avaya ***
*** Copyright (c) 1996-2010, All Rights Reserved ***
*** BOSS 6.0 SSH ***
*** HW:34 FW:6.0.0.15 SW:v6.2.6.035 ***
***************************************************************
No comments:
Post a Comment