Avaya ERS3510GT boot sequence after power on (software version 5.1.0.007)

The following output has been captured off the serial console port of an Avaya ERS3510GT during its boot sequence after power on.

Device is running software version 5.1.0.007

Serial settings are: 9600 baud, 8 data bits, no parity and 1 stop bit (9600/8-N-1)

Testing Memory



Booting...
Boot Version  1.0.0.3  Oct 11 2012, 13:23:46

Starting Diagnostics...

Starting...

Ethernet Routing Switch 3510GT

Resets:         4.
Reading MAC Address...
MAC Address: MA-CA-DD-RE-SS-00
Attaching SOC unit 0... PCI device ASIC attached as unit 0

ERS3500 Diagnostics   1.0.0.8   Jan 03 2013, 14:26:04

Test 111  DDRAM Walking 1/0s              - PASSED
Test 112  DDRAM Byte/Word/Long            - PASSED
Test 113  DDRAM Power-of-2                - PASSED
Test 121  ROM   Config                    - PASSED
Test 207  XGS   SWITCH Registers          - PASSED
Test 221  PHYs  Register                  - PASSED
Test 271  Ports Internal Loopback         - PASSED

Starting  Agent  Version:  5.1.0.007

Decompressing the image  done.

Initializing ......

Completing initialization...


         ###   ###            ###   ###   ###            ###   ###
        #####   ###          ###   #####   ###          ###   #####
       ### ###   ###        ###   ### ###   ###        ###   ### ###
      ###   ###   ###      ###   ###   ###   ###      ###   ###   ###
     ###     ###   ###    ###   ###     ###   ###    ###   ###     ###
    ###       ###   ###  ###   ###       ###   ###  ###   ###       ###
   ##########  ###   ######   ##########  ###   ######   ##########  ###
  ############  ###   ####   ############  ###   ####   ############  ###
 ###             ###   ##   ###             ###  ###   ###             ###
                                                ###
                                               ###


Enter Ctrl-Y to begin.

  ***************************************************************
  *** Ethernet Routing Switch 3510GT                          ***
  *** Avaya                                                   ***
  *** Copyright (c) 1996-2013,  All Rights Reserved           ***
  ***                                                         ***
  *** HW:02       FW:1.0.0.8   SW:v5.1.0.007                  ***
  ***************************************************************

Avaya ERS3510GT-PWR+ boot sequence after power on (software version 5.1.0.007)

The following output has been captured off the serial console port of an Avaya ERS3510GT-PWR+ during its boot sequence after power on.

Device is running software version 5.1.0.007

Serial settings are: 9600 baud, 8 data bits, no parity and 1 stop bit (9600/8-N-1)

Testing Memory



Booting...
Boot Version  1.0.0.3  Oct 11 2012, 13:23:46

Starting Diagnostics...

Starting...

Ethernet Routing Switch 3510GT-PWR+

Resets:         4.
Reading MAC Address...
MAC Address: MA-CA-DD-RE-SS-00
Attaching SOC unit 0... PCI device ASIC attached as unit 0

ERS3500 Diagnostics   1.0.0.8   Jan 03 2013, 14:26:04

Test 111  DDRAM Walking 1/0s              - PASSED
Test 112  DDRAM Byte/Word/Long            - PASSED
Test 113  DDRAM Power-of-2                - PASSED
Test 121  ROM   Config                    - PASSED
Test 151  FANs  Status                    - PASSED
Test 207  XGS   SWITCH Registers          - PASSED
Test 221  PHYs  Register                  - PASSED
Test 271  Ports Internal Loopback         - PASSED

Starting  Agent  Version:  5.1.0.007

Decompressing the image  done.

Initializing ......

Completing initialization...


         ###   ###            ###   ###   ###            ###   ###
        #####   ###          ###   #####   ###          ###   #####
       ### ###   ###        ###   ### ###   ###        ###   ### ###
      ###   ###   ###      ###   ###   ###   ###      ###   ###   ###
     ###     ###   ###    ###   ###     ###   ###    ###   ###     ###
    ###       ###   ###  ###   ###       ###   ###  ###   ###       ###
   ##########  ###   ######   ##########  ###   ######   ##########  ###
  ############  ###   ####   ############  ###   ####   ############  ###
 ###             ###   ##   ###             ###  ###   ###             ###
                                                ###
                                               ###


Enter Ctrl-Y to begin.

  ***************************************************************
  *** Ethernet Routing Switch 3510GT-PWR+                     ***
  *** Avaya                                                   ***
  *** Copyright (c) 1996-2013,  All Rights Reserved           ***
  ***                                                         ***
  *** HW:11       FW:1.0.0.8   SW:v5.1.0.007                  ***
  ***************************************************************

Linksys / Cisco SRW208 boot sequence after power on (software version 1.0.4)

The following output has been captured off the serial console port of an Linksys / Cisco SRW208 during its boot sequence after power on.

Device is running software version 1.0.4

Serial settings are: 38400 baud, 8 data bits, no parity and 1 stop bit (38400/8-N-1)

------ Performing the Power-On Self Test (POST) ------

UART Channel Loopback Test........................PASS

Testing the System SDRAM..........................PASS

Boot1 Checksum Test...............................PASS

Boot2 Checksum Test...............................PASS

Flash Image Validation Test.......................PASS



BOOT Software Version 1.0.1 Built  06-Jun-2006  17:23:21

:::
:::        ::: :::       ::: :::     :::::  :::::::::: :::      ::: ::::::::::
:::        ::: :::::     ::: :::   :::::   ::::     ::: ::::  :::: ::::     :::
:::        ::: ::: :::   ::: ::::::::      ::::          ::::::::  ::::
:::        ::: :::   ::  ::: ::::::::::     ::::::::::     ::::     ::::::::::
:::        ::: :::    :::::: :::    ::::            :::    ::::             :::
:::::::::: ::: :::      :::: :::      :::: :::......:::    ::::    :::......:::
 ......... ... ...       ... ...       .... ..........     ....     ..........

Linksys SmartSwitch SRW208 based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.

Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
 100%
Decompressing SW from flash
 100%

OK
Running from RAM...

******************************************************************
*** Running  SW  Ver. 1.0.4  Date  06-Sep-2007  Time  09:11:40 ***
******************************************************************

HW version is 00.03.00
Base Mac address is: MA:CA:DD:RE:SS:00
Dram size is  : 32M bytes
Dram first block size is  : 17152K bytes
Dram first PTR is  : 0xF40000
Flash size is: 8M
01-Jan-2000 01:01:05 %CDB-I-LOADCONFIG: Loading startup configuration.
Device configuration:
PCB revision: 1
Slot 1 - SRW208 HW Rev.  0.1
Tapi Version: v1.3.3.1
Core Version: v1.3.3.1
01-Jan-2000 01:01:18 %INIT-I-InitCompleted: Initialization task is completed


                          Login Screen
                          ============


                       User Name:

                       Password:

Avaya ERS5510-48T boot sequence after power on (software version 6.2.6.035)

The following output has been captured off the serial console port of an Avaya ERS5510-48T during its boot sequence after power on.

Device is running software version 6.2.6.035

Serial settings are: 9600 baud, 8 data bits, no parity and 1 stop bit (9600/8-N-1)

Booting...

Testing Memory...............................

Starting..

Ethernet Routing Switch 5510-48T

Hardware Rev :    4

CPU CLOCK :266000000
Resets: 19.
Initializing Flash..
Reading MAC Address..
MAC Address: MA-CA-DD-RE-SS-00
Initializing Switch CBs
PCI unit 0: Dev 0x5670, Rev 0x02, Chip BCM5670_A1, Driver BCM5670_A0
PCI unit 1: Dev 0x5690, Rev 0x03, Chip BCM5690_A2, Driver BCM5690_A0
PCI unit 2: Dev 0x5690, Rev 0x03, Chip BCM5690_A2, Driver BCM5690_A0
PCI unit 3: Dev 0x5690, Rev 0x03, Chip BCM5690_A2, Driver BCM5690_A0
PCI unit 4: Dev 0x5690, Rev 0x03, Chip BCM5690_A2, Driver BCM5690_A0
Attaching SOC unit 0... PCI device BCM5670_A1 attached as unit 0.
Attaching SOC unit 1... PCI device BCM5690_A2 attached as unit 1.
Attaching SOC unit 2... PCI device BCM5690_A2 attached as unit 2.
Attaching SOC unit 3... PCI device BCM5690_A2 attached as unit 3.
Attaching SOC unit 4... PCI device BCM5690_A2 attached as unit 4.

Diagnostic Version 6.0.0.15 Nov 14 2011, 10:09:06



Test 102  ROM  Config                - PASSED
Test 104  FANs                       - PASSED
Test 207  XGS SWITCH Registers       - PASSED
Test 208  FABRIC Registers           - PASSED
Test 211  PHYs Register              - PASSED
Test 212  Internal Loopback          - PASSED
 Press Esc to Enter Diag
Run Agent 1 Ver:6.2.6.035
Decompressing the image  done.
Target Name: tgt
User: target
usrNetDevNameGet: no network device
done
Code Segment 0x100000 -- 0x10a0fff protection=2

Initializing ......
Broadcom Command Monitor: Copyright (c) 1998-2008 Broadcom Corporation

Completing initialization...


         ###   ###            ###   ###   ###            ###   ###
        #####   ###          ###   #####   ###          ###   #####
       ### ###   ###        ###   ### ###   ###        ###   ### ###
      ###   ###   ###      ###   ###   ###   ###      ###   ###   ###
     ###     ###   ###    ###   ###     ###   ###    ###   ###     ###
    ###       ###   ###  ###   ###       ###   ###  ###   ###       ###
   ##########  ###   ######   ##########  ###   ######   ##########  ###
  ############  ###   ####   ############  ###   ####   ############  ###
 ###             ###   ##   ###             ###  ###   ###             ###
                                                ###
                                               ###


Enter Ctrl-Y to begin.

  ***************************************************************
  *** Ethernet Routing Switch 5510-48T                        ***
  *** Avaya                                                   ***
  *** Copyright (c) 1996-2010,  All Rights Reserved           ***
  *** BOSS 6.0 SSH                                            ***
  *** HW:06       FW:6.0.0.15  SW:v6.2.6.035                  ***
  ***************************************************************

Avaya ERS5510-24T boot sequence after power on (software version 6.2.6.035)

The following output has been captured off the serial console port of an Avaya ERS5510-24T during its boot sequence after power on.

Device is running software version 6.2.6.035

Serial settings are: 9600 baud, 8 data bits, no parity and 1 stop bit (9600/8-N-1)

Booting...

Testing Memory...............................

Starting..

Ethernet Routing Switch 5510-24T

Hardware Rev :    4

CPU CLOCK :266000000
Resets: 7.
Initializing Flash..
Reading MAC Address..
MAC Address: MA-CA-DD-RE-SS-00
Initializing Switch CBs
PCI unit 0: Dev 0x5670, Rev 0x02, Chip BCM5670_A1, Driver BCM5670_A0
PCI unit 1: Dev 0x5690, Rev 0x03, Chip BCM5690_A2, Driver BCM5690_A0
PCI unit 2: Dev 0x5690, Rev 0x03, Chip BCM5690_A2, Driver BCM5690_A0
Attaching SOC unit 0... PCI device BCM5670_A1 attached as unit 0.
Attaching SOC unit 1... PCI device BCM5690_A2 attached as unit 1.
Attaching SOC unit 2... PCI device BCM5690_A2 attached as unit 2.

Diagnostic Version 6.0.0.15 Nov 14 2011, 10:09:06



Test 102  ROM  Config                - PASSED
Test 104  FANs                       - PASSED
Test 207  XGS SWITCH Registers       - PASSED
Test 208  FABRIC Registers           - PASSED
Test 211  PHYs Register              - PASSED
Test 212  Internal Loopback          - PASSED
 Press Esc to Enter Diag
Run Agent 1 Ver:6.2.6.035
Decompressing the image  done.
Target Name: tgt
User: target
usrNetDevNameGet: no network device
done
Code Segment 0x100000 -- 0x10a0fff protection=2

Initializing ......
Broadcom Command Monitor: Copyright (c) 1998-2008 Broadcom Corporation

Completing initialization...


         ###   ###            ###   ###   ###            ###   ###
        #####   ###          ###   #####   ###          ###   #####
       ### ###   ###        ###   ### ###   ###        ###   ### ###
      ###   ###   ###      ###   ###   ###   ###      ###   ###   ###
     ###     ###   ###    ###   ###     ###   ###    ###   ###     ###
    ###       ###   ###  ###   ###       ###   ###  ###   ###       ###
   ##########  ###   ######   ##########  ###   ######   ##########  ###
  ############  ###   ####   ############  ###   ####   ############  ###
 ###             ###   ##   ###             ###  ###   ###             ###
                                                ###
                                               ###


Enter Ctrl-Y to begin.

  ***************************************************************
  *** Ethernet Routing Switch 5510-24T                        ***
  *** Avaya                                                   ***
  *** Copyright (c) 1996-2010,  All Rights Reserved           ***
  *** BOSS 6.0 SSH                                            ***
  *** HW:34       FW:6.0.0.15  SW:v6.2.6.035                  ***
  ***************************************************************

Avaya ERS4524GT-PWR boot sequence after power on (software version 5.6.2.027)

The following output has been captured off the serial console port of an Avaya ERS4524GT-PWR during its boot sequence after power on.

Device is running software version 5.6.2.027

Serial settings are: 9600 baud, 8 data bits, no parity and 1 stop bit (9600/8-N-1)

Booting...


Testing main memory         - PASSED

Starting...

Ethernet Routing Switch 4524GT-PWR

Boot Version 5.3.0.0 Wed Oct 15 15:06:49 2008


Hardware Rev: 04
Resets: 16
Initializing Flash...
Reading MAC Address...
MAC Address: MA-CA-DD-RE-SS-00
Initializing Switch CBs...
PoE Firmware Info  :
   Version number  : 400
   Product number  : 0
   Build           : 1
Attaching SOC unit 0... PCI device ASIC1 attached as unit 0...

Diagnostic Version 5.3.0.3 Thu Feb 19 13:58:15 2009

Press Control-C to Enter Diag

Test ROM Config                   - PASSED
Test FANs                         - PASSED
Test Internal Loopback            - PASSED
Test ASIC1 Registers              - PASSED
Test PHY Registers                - PASSED
Test USB Registers                - PASSED

Starting Agent Code...

Decompressing the image  done.

Initializing ......
Broadcom Command Monitor: Copyright (c) 1998-2010 Broadcom Corporation

Completing initialization...


         ###   ###            ###   ###   ###            ###   ###
        #####   ###          ###   #####   ###          ###   #####
       ### ###   ###        ###   ### ###   ###        ###   ### ###
      ###   ###   ###      ###   ###   ###   ###      ###   ###   ###
     ###     ###   ###    ###   ###     ###   ###    ###   ###     ###
    ###       ###   ###  ###   ###       ###   ###  ###   ###       ###
   ##########  ###   ######   ##########  ###   ######   ##########  ###
  ############  ###   ####   ############  ###   ####   ############  ###
 ###             ###   ##   ###             ###  ###   ###             ###
                                                ###
                                               ###


Enter Ctrl-Y to begin.

  ***************************************************************
  *** Ethernet Routing Switch 4524GT-PWR                      ***
  *** Avaya                                                   ***
  *** Copyright (c) 1996-2011,  All Rights Reserved           ***
  *** SSH                                                     ***
  *** HW:04       FW:5.3.0.3   SW:v5.6.2.027                  ***
  ***************************************************************

Cisco ASA5505 boot sequence after power on (software version 8.2(1))

The following output has been captured off the serial console port of an Cisco ASA5505 during its boot sequence after power on.

Device is running software version 8.2(1)

Serial settings are: 9600 baud, 8 data bits, no parity and 1 stop bit (9600/8-N-1)

CISCO SYSTEMS
Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45

Low Memory: 632 KB
High Memory: 507 MB
PCI Device Table.
Bus Dev Func VendID DevID Class              Irq
 00  01  00   1022   2080  Host Bridge
 00  01  02   1022   2082  Chipset En/Decrypt 11
 00  0C  00   1148   4320  Ethernet           11
 00  0D  00   177D   0003  Network En/Decrypt 10
 00  0F  00   1022   2090  ISA Bridge
 00  0F  02   1022   2092  IDE Controller
 00  0F  03   1022   2093  Audio              10
 00  0F  04   1022   2094  Serial Bus         9
 00  0F  05   1022   2095  Serial Bus         9

Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008

Platform ASA5505

Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.

Launching BootLoader...
Default configuration file contains 1 entry.

Searching / for images to boot.

Loading /asa821-k8.bin... Booting...
Platform ASA5505
Loading...
Àdosfsck 2.11, 12 Mar 2005, FAT32, LFN
Starting check/repair pass.
Starting verification pass.
/dev/hda1: 150 files, 28762/62844 clusters
dosfsck(/dev/hda1) returned 0
Set 'tap0' persistent and owned by uid 0
IO memory 39583744 bytes

Processor memory 386732032, Reserved memory: 62914560 (DSOs: 0 + kernel: 62914560)

Total SSMs found: 0

Total NICs found: 10
88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: MACA.DDRE.SS00
88E6095 rev 2 Ethernet @ index 08 MAC: MACA.DDRE.SS00
88E6095 rev 2 Ethernet @ index 07 MAC: MACA.DDRE.SS00
88E6095 rev 2 Ethernet @ index 06 MAC: MACA.DDRE.SS00
88E6095 rev 2 Ethernet @ index 05 MAC: MACA.DDRE.SS00
88E6095 rev 2 Ethernet @ index 04 MAC: MACA.DDRE.SS00
88E6095 rev 2 Ethernet @ index 03 MAC: MACA.DDRE.SS00
88E6095 rev 2 Ethernet @ index 02 MAC: MACA.DDRE.SS00
88E6095 rev 2 Ethernet @ index 01 MAC: MACA.DDRE.SS00
y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: MACA.DDRE.SS00

Licensed features for this platform:
Maximum Physical Interfaces  : 8
VLANs                        : 3, DMZ Restricted
Inside Hosts                 : 10
Failover                     : Disabled
VPN-DES                      : Enabled
VPN-3DES-AES                 : Enabled
SSL VPN Peers                : 2
Total VPN Peers              : 10
Dual ISPs                    : Disabled
VLAN Trunk Ports             : 0
Shared License               : Disabled
AnyConnect for Mobile        : Disabled
AnyConnect for Linksys phone : Disabled
AnyConnect Essentials        : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions      : 2
Total UC Proxy Sessions      : 2
Botnet Traffic Filter        : Disabled

This platform has a Base license.

Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode  : CNlite-MC-IPSECm-MAIN-2.04

Cisco Adaptive Security Appliance Software Version 8.2(1)

  ****************************** Warning *******************************
  This product contains cryptographic features and is
  subject to United States and local country laws
  governing, import, export, transfer, and use.
  Delivery of Cisco cryptographic products does not
  imply third-party authority to import, export,
  distribute, or use encryption. Importers, exporters,
  distributors and users are responsible for compliance
  with U.S. and local country laws. By using this
  product you agree to comply with applicable laws and
  regulations. If you are unable to comply with U.S.
  and local laws, return the enclosed items immediately.

  A summary of U.S. laws governing Cisco cryptographic
  products may be found at:
  http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

  If you require further assistance please contact us by
  sending email to export@cisco.com.
  ******************************* Warning *******************************

Copyright (c) 1996-2009 by Cisco Systems, Inc.

                Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

                Cisco Systems, Inc.
                170 West Tasman Drive
                San Jose, California 95134-1706


Cryptochecksum (unchanged): OMITOMIT OMITOMIT OMITOMIT OMITOMIT
The flash device is in use by another task.
Type help or '?' for a list of available commands.
ciscoasa>